Full in-house fitting service in UNF, UNEF and metric threads. This is accomplished on our specialist lathes; we use a unique system for machining muzzle threads. We do NOT use revolving centres or mandrels down the barrel as this may damage the rifling or the crown.

We machine barrels through the head-stock held in to specialist manufactured four-jaw chucks, mounted with bronze jaws.

Concentricity is achieved via long-armed internal dial gauges and adjustments are made to zero the bore axis. Not all barrels are ground concentric to the bore axis. The outside diameter could vary up to 0.006".

We endeavour to have your rifle threaded and returned within an impressive 48-hour turnaround. This excludes (if required) the rifle being re-proofed.

To save your hearing and, if you use a rifle for work, to comply with the UK Health and Safety legislation. Independent tests with a 308 Winchester hunting rifle confirm that Reflex Suppressors do reduce the sound pressure at the shooter's ear to well below the British Health and Safety Executive's "peak action level" of 140 dB. Above this level, HSE regulations require employers to reduce workers' exposure as far as reasonably practicable by means other than ear protectors. This legal requirement also extends to self-employed persons.

In practice, depending on the amount of bullet flight noise reflected back to the shooter by trees or fences etc., a full-bore hunting rifle with a good suppressor sounds about the same as a high velocity 22 LR rim-fire rifle.



The COMPACT model. This product is the latest advancement - being shorter, lighter with improved performance; allowing for fast removal and fitting to another rifle without the down-time of having to replace the rear barrel support bush with the appropriate one. Ideal for commercial applications.

The COMPACT is an over-barrel design, developed for the following calibres:

              MAE Sound Moderator Specifications

Please note:

The new T12 is shorter to fit Sako and Tikka 20 inch barrels.

The new T12 is now lighter than the reflex T8. The T12 Scout is also lighter, more efficient than the aluminum mods and will not flame erode.

The new LMC is cheaper, lighter and more efficient than the ASE UTRA.
THREADS available: ½”x20 unf , M14x1, M18x1, 5/8x18, M17x1

You have the choice of different baffle settings, from 8 to 12 baffles. These stainless steel robust sound moderators have stood the test and in my opinion are one of the best available on the market today!


 

DESCRIPTION

The Ase Utra jet-Z™ CQB and CQBS suppressors are lightweight,ultra-compact rifle suppressors.

Manufactured in Finland by Ase Utra OY, the jet-Z™CQB and CQBS suppressors incorporates Ase Utra's patented jet-Z™ baffle system.

The jet-Z™ CQB and CQBS are all-steel, all-welded units.

The jet-Z™ CQB adds only 484 to 505 grams net weight and 125 mm added length to a typical rifle and the CQBS is even smaller and lighter at 411-432grams and an added length of 96 mm.

With a diameter of just 40 mm, the suppressors are slim enough to be used with low-mounted telescopic or iron sights.

The jet-Z™ CQB and CQBS are available with a variety of internal threads to fit directly onto the rifle barrel.

Standard threads include for example; M14x1, M17x1, M18x1 ½"x20UNF, ½"x28 UNEF to fit most current centrefire rifles.

Other threads are also available.

PERFORMANCE

The jet-Z™CQB and CQBS suppressor reduces sound pressure level by 28-32 dB (A) (depending on calibre and measurement location)

In addition to the reduction in sound signature, the suppressor also reduces recoil and an added benefit is the elimination of visible muzzle flash.

Rifles tested with the jet-Z™ CQB and CQBS suppressor comply with the new personal noise exposure limit set by European Directive 2003/10/EC (140 Pa or137 dB(C)).

DESCRIPTION

Ase Utra S series SL5 suppressors are available in calibres .222 Rem - .30-06 Spr.

The S series SL5 suppressors are renewed and lighter than previous versions of the S series S5 damper. The weapon in domestic production Utra S series SL5 suppressors are made ??of precision-cast components, and assembled by welding.

S series SL5 silencers are 300 series stainless steel. The S series SL5 damper continue to make only 98 mm, a diameter of 44.5 mm

The S series SL5 suppressors are available as standard, inter alia, the following threaded; M14x1, M15x1, M17x1, M18x1, ½ "x 20 UNF (other threads can be found in the standard range if necessary) S series SL5 suppressors are thus suitable as a light pipe to hunting weapons like a thick pipe would track aseisiinkin.

POWER

The S series SL5 attenuator to reduce the balance of the sound pressure level of 22-30 dB (depending on the caliber and measuring point). The S series SL5 suppressors calculate the measured sound pressure level of the shooter's ear of 128-135 dB. Cent, i.e. clearly less than 140 dB, which is widely regarded as hearing damage limit impulsive noise.

Reduced sound pressure level reduces the risk of the shooter to get hearing damage, and also significantly reduce noise from the environment. In addition, the damper significantly reduces the knock of the weapon and the muzzle flash.

PERFORMANCE

The S series SL5 suppressors reduce the weapon sound pressure level by 25-33 dB (depending on calibre, ammuntion type, measurement location).

The silencer complying with the EU Directive 2003/10 / EC of the set requirements (140 Pa or 137 dB (C))

DESCRIPTION

The Ase Utra jet-Z™ COMPACT is a high-performance suppressor designed for centrefire rifles up to .300 Win Mag calibre.

Manufactured in Finland by Ase Utra OY, the jet-Z™ COMPACT suppressors incorporate Ase Utra's patented jet-Z™ baffle system.

The jet-Z™ COMPACT suppressors are all-steel, all-welded units rated for hunting, sport shooting or professional use on bolt-action or semi-automatic weapons.

The jet-Z™ COMPACT suppressor adds only 490 - 515 grams eight and 155 mm net length to a typical rifle – and with a diameter of just 40mm, the suppressor is slim enough to be used with low mounted telescopic or iron sights.

The jet-Z™ COMPACT suppressors are available with avariety of metric and inch size threads to fit directly onto the rifle barrel.

Standard threads include for example; M14x1, M15x1, M17x1, M18x1, ½"x20 UNF, ½"x28 UNEF to fit most current centrefire rifles.

Other threads are also available.

PERFORMANCE

The jet-Z™ COMPACT suppressor reduces the weapon sound pressure level by 25 to 32 dB (depending on ammunition type, calibre, measurement location etc.), and significantly reduces recoil and muzzle flash.

The result is a weapon firing full power ammunition, with a muzzle signature lower than that of an unsuppressed .22 rimfire rifle.

All standard rifles tested with the jet-Z™ COMPACT suppressors comply with the latest personal noise exposure limit set by European Directive 2003/10/EC(140 Pa or 137 dB(C)).

DESCRIPTION

The Ase Utra S series SL7 sound suppressors are available invarious calibres, from .308 Win up to 9.3x66 and .338 Lap mag.

SL7 suppressors are updated and lightened variants of the earlier S7 suppressor.

Manufactured in Finland by Ase Utra OY, the S series SL7 suppressors are manufactured out of 300 series stainless steel and are assembled by welding.

The S series is a good option for those who are seeking maximum sound suppression levels on .308 Win calibre for example.

S series SL7 suppressors feature a robust construction and they are built for a long service life.

The S series SL7 suppressor adds only 144 mm to the length of the weapon, with the diameter being 45 mm.

S series SL7 suppressors are available with a varietyof internal threads to fit directly onto the rifle barrel.

Standard threads include for example M14x1, M15x1, M17x1, M18x1, ½"x20 UNF to fit most current centrefire rifles.

Other threads are also available.

PERFORMANCE

The S series SL7 suppressors also reduce recoil and muzzle flash significantly.

Rifles tested with the S series SL7 suppressors, comply with the latest personal exposure limit set by the European Directive2003/10/EC (140 Pa tai 137 dB (C)).

Its compact size and light weight maintain all shooting characteristics almost unchanged. Full-steel patented construction ensures maximum durability.

To be effective, full-bore rifle suppressors have to be rather bulky. Adding a suppressor to a full-bore rifle normally increases the overall length by about twelve inches, making the weapon awkward and muzzle-heavy. The suppressed weapon doesn't fit in a standard rifle case, so the sound moderator must be removed for storage and transport. Shortening the barrel by a few inches helps a bit, but if the barrel is shortened too much, the bullet muzzle velocity and trajectory are adversely affected. To overcome these and other problems, Finnish designer Juha Hartikka invented the Reflex Suppressor.

We have seen a significant noise reduction when fox shooting at night; our results have increased, with those old wise foxes.

What is a Reflex Suppressor?

The patented Reflex design of suppressor (or sound moderator) has the expansion chamber sleeved back over the front four to eight inches of the barrel. This reduces the overall length of the suppressed weapon, and improves its balance and handling qualities.